Tool Talk #4 Japanese Hand Saws

Tool Talk #4 Japanese Hand Saws

Here is some beginner information on woodworking with Japanese hand saws and the difference between hand made saws and machine made saws.

Gyokucho Saws:

Amazing Japanese woodworking channels:

Previous Tool Talks:

Mallets and Axes:

Japanese Chisels:

Japanese Planes:
Video Rating: / 5

Tool Talk #2 How To Find A Good Japanese Chisel

Japanese woodworking chisels are great but knowing what to look for when buying one can be confusing. Here is my take on buying used chisels on ebay.

Japanese Tools Book by Toshio Odate:


Matsumura Dovetail Chisels:

Hand Tools

Pfeil Carving Chisels:

My Website:

Tool Talk #3 Japanese Hand Planes

An informative introduction to Japanese Hand Planes. Learn about their construction and features as well as what tasks they are best suited for. I have also included some of my North American iron body planes in this talk.

My Website:

Online stores for Japanese Planes:

Sashimono Woodworking:

Lie Neilsen Low Angle Plane:

See my Japanese plane in action:

552 Chisel Talk 3 chisels to start with – Woodworking Plans Catalog

552 Chisel Talk 3 chisels to start with - Woodworking Plans Catalog 552 Chisel Talk 3 chisels to start with

plans for furniture, the possibility of woodwork is loved by a great number of folks, both men and women. Having the ability to create anything stunning from a typical bit of wooden is quite rewarding. If you are searching for learning or even in boosting your capabilities, this informative article might have some tips that can be used with your next venture.

Reusable sanding blocks help you save time and cash. To make them you only need a few items of scrap wood. Reduce a piece of 2×4 right into a rectangle about 2 ” broad and 4 in . very long. Minimize a bit of sandpaper the actual size of your prohibit. Then, spray one particular aspect of the piece of lumber with mist, and woodworking plans video sticky and adhere the sandpaper for the prohibit of wood.

In the crunch, you can use a hacksaw blade as a makeshift compass. Typically you can’t get a compass when you want it in room, when you are out of your, however woodworking plans umbrella stand shop. You may quickly nail a hole in the center of a hacksaw blade, then steady the pen up against the suitable teeth to get the right size. Pull that group of friends.

When you have your own kitchen table found, you will ultimately need to crosscut some timber. This can provide your hands and fingers not far from the discovered shield and blade. In the event the found kicks rear, you might be headed to the medical center. It is advisable to minimize a obstruct of wood to force the timber through the discovered with.

Constantly storage building plans keep to the owner’s guide when working with your carpentry resources. Being unsure of the manual’s recommendations can lead to damage or failure of your own device, and you definitely tend not to want both of the to take place for you. When you have not even read your manuals do it without delay!

Sometimes some glue is preferable to a clamp. Every carpentry go shopping must have a warm fasten pistol. Hot fasten will hold tiny items better than any build furniture plans clamp at any time could, if you could even maneuver one out of location. If you are completed, just delicately pry loosened by using a putty blade.

woodworking tools pdf
woodworking plans garage storage
woodworking plans for bedroom furniture
Video Rating: / 5

Tool Talk #12: Grizzly G0555LANV Bandsaw


These videos are short project and everyday updates. If you would like to see actual woodworking videos check out my main channel.
Main Channel:
My website:
Video Rating: / 5

Subscribe to talk woodworking with Andy

These woodworking videos are for your enjoyment as you watch me make some very fine furniture and some neat tools! I have a one-person woodworking shop in Virginia, and you get to see how I approach problems, using techniques I’ve honed for years as well as those I’m trying for the first time! I make new videos, now in HD with every new furniture project, so subscribe to AndyPitts1000 and don’t miss a cut! Thanks for subscribing.
Video Rating: / 5

The Woodworking Weekend Shop Talk S01E11

The Woodworker’s Weekend Shop Talk 
A weekly, non-stop wood shop conversation.  Each week we try to bring you a new spotlight.
We get their perspectives while gaining insight into their way of doing things!

= Spotlight Guest Drew Short of Rock-n H Woodshop =

See a listing of all our guests and their links here:

= Other Community Mentions =

2014 Christmas Ornament Woodturning Challenge
Sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson 

Sterling Davis – Pallet Challenge

= Hosts =

McGinn’s Woodshop


The Bearded Woodworker

And ask to be kept in the loop via our mailing list
Video Rating: / 5