Any easy to make storage cabinet using pocket hole joinery. A simple weekend project.
MORE details or PLANS for this project – http://waylightcreations.com/simple-diy-storage-cabinet
Check out our site for FREE plans and more http://www.waylightcreations.com
Music – Waylight Music – http://www.waylightmusic.com/
All sound FX – freesound.org (all public domain)
Project info ——————————-
This project was created with the following materials/tools:
Pine 1 x lumber
The whole build started out with a few pieces of standard 1x pine boards.
First I marked out and cut the pieces I would need for each shelf.
For this cabinet there are 8. Seven actual shelves and the top.
After I had the proper length cut for each one, I headed over to the table saw and ripped each piece down ¼ inch shorter than each of the sides would be to allow for the back panel later on.
Using a circular saw, I cut some off the side of each board that would be the side to bring it down to the dimension I wanted. I also cut them to length on the miter saw.
Once I had everything cut for the shell of the cabinet, I started the task of drilling all of the pocket holes. I laid these out with equal spacing so they would look somewhat nice when the cabinet was opened, especially since I wasn’t planing on filling in the holes.
After all the holes were drilled I did the most exciting part of the project. I only sanded the side opposite of the pocket holes though. It saved both time and my sanity. I also hit the front edges as well.
The next step was to mark out where each shelf would go. This is fairly quick work of you measure out each shelf and then pencil your lines on with a square.
Now that all the holes are drilled and the marks are drawn you can start screwing the shelves to the sides. I started out by attaching all the shelves to one side. After I had all of those attached, I moved what I had assembled, flipped it and sat it back down on the opposite side. Since both sides are marked the same, this makes it incredibly easy to line up.
Next, I flipped the cabinet on its face and added a ¼ inch deep rabbet around the inside edge of each side to allow it to receive the back panels.
The back panels I used were some ¼ inch thick harboard panels that I had gotten from an old building I recently helped renovate. Before nailing them down, I measured to make sure everything was square and then fastened them down with some brads.
Since these did come from an old building, I sanded down the back of the panels to remove some of the coal dust that was caked into the fibers.
I also made two pieces for the front of the cabinet that would set above and below the doors. To make them look a little nicer, I put chamfer on the edges. Then I glued and nailed them in place.
The last thing to construct was the cabinet doors. The doors I settled on were simple and were assembled with butt joints, glue and you guessed it, more pocket screws.
So they would match the top and bottom plates of the cabinet, I added the same chamfer around the outside edges of the doors, but I left the inside edges how they were.
… read more about this project on our website. Link at the top of the description. Video Rating: / 5
storage shed | free woodworking plans | wooden sheds
My Shed Plans Review. In-depth report of the download page and what to expect from My Shed Plans.
You can check to get more information about the plans usually here:
My shed plans
my shed plans review
storage shed plans
how to build a garden shed
garden shed plans
how to build a shed
plans for building a shed
plans to build a shed
plans for a shed
plans for sheds
shed building plans
building plans for sheds
storage sheds plans
tool shed plans
potting shed plans
barn shed plans
diy storage shed
diy shed plans
lean to plans
lean to shed
how to build a lean to shed
garden storage shed
outdoor storage sheds
outdoor storage shed
outdoor shed plans
wood shed designs
garden shed designs
outside storage sheds
outdoor storage buildings
building a shed
build a storage shed
build your own shed
build a shed plans
small shed plans
large shed plans
storage shed designs
building a storage shed
wooden storage sheds
how to build a lean to
how to build a storage building
how to build a shed roof
shed plans 8 x 12
shed plans 10 x 12
10 x 12 shed plans
12 x 16 shed plans
backyard storage sheds
wood storage shed
backyard shed plans
wooden storage buildings
how to roof a shed
bike storage shed
how to build a storage building
wood storage buildings
firewood storage shed
how to build shed
10 x 10 shed
how to build a lean to roof
building a lean to shed
building a lean to
greenhouse building plans Video Rating: / 5
The Multi Bench with L-BOXX Storage provides the woodworker with a solution to a common problem of space. You no longer need separate storage and working areas in the workshop; your tools are all within reach, tidily stored away in the bench itself.
It is designed to hold up to 20 L-BOXX’s of varying sizes, meaning every tool you will ever need is less than an arm’s reach away. The sleek and practical design includes drawers for the L-BOXX’s so they are easily accessible. This is more than just a storage solution however- the bench itself provides the perfect sturdy platform for all of your woodworking needs. Video Rating: / 5
I have used disposable plastic take away containers to store all my hardware and small parts for years and have wanted to build a unit to store them for nearly as long. I started by messuring up and doing my sums as to determin my dimensions then grabbed some scrap ply from some table tops I rebuilt for a wine bar a while back ( this will be up soon stay tuned!) and cleaned them up, sanding and filling the worst of the holes.
Next I scribbed all my lines on what would be the upright pieces and cut them all in on the table saw. It took 3 passes for each but I cut one on each piece filipping sides to and faces. These were cut to an managable size on my (unsecured ) mitersaw then cut to size on the tablesaw. Everything got a couple coats of paint then tops and bottoms had the dados cut with a quick jig which I was very proud of inventing untill I realised people had been copying me for many years before I thought if it. Everything was then glued and brad nailed together checking for square. There was a lot more fetteling to get this done than there was time to show in the video but it all went together well in the end.
I cut stripps of some left over pine I had from making picture frames and glued these to the front. These were held in place with masking tape as I didn’t want nails visable on the front. On the back I cut strips slightly wider with a rebateto allow a hardboard back to be slotted in. This were glued and nailed inplace as its the back. Any little marks left were filled, then sanded and the trip was given a couple of coats of dannish oil and left to dry over night. Then next day I tapped the edges and gave the top and sides one more coat of paint and then they were done! Video Rating: / 5
SUBSCRIBE for a new DIY video almost every day! Building a storage bed is a great opportunity to use your woodworking skills. Use the right free storage bed plans and invest in high quality materials to get a professional result and to enhance the look of your home.
Click here ►► http://amzn.coupons-vault.com?v=VBlAt35CApE ArtBin Super Satchel Cartridge & Tool Storage Includes 2 molded trays-one to securely store up to 16 cartridges at an easy viewing angle and the other to hold related cartridge booklets and tools Both trays are removable and can be arranged to best fit your needs Satchel measures 14 by 15 by 2-inch B0051C08LS
Get a discount on all Casper Mattresses: https://casper.com/woodworking
This platform bed is easy to make and features six large drawers for storing linens or quilts. More info and free plans: http://bit.ly/WWMMbed
The Dark Walnut Danish Oil I used:
WWMM is sponsored by MicroJig, maker of the GRR-RIPPER
Become a Me-Mo! Show off your work, download free plans and meet be part of the friendly community at http://woodworking.formeremortals.net/
Woodworking For Mere Mortals. Fun woodworking projects on Fridays.
Support free woodworking content: http://woodworking.formeremortals.net/support-wwmm/
448 Ignacio Blvd. #237
Novato CA 94949
HOME & GARDEN FOR MERE MORTALS:
MERE MINUTES. Vlog, Ask Me-Mo, Me-Mos Make: http://www.youtube.com/user/steveinmarin