Easy DIY Wood Storage Cabinet

Any easy to make storage cabinet using pocket hole joinery. A simple weekend project.
MORE details or PLANS for this project – http://waylightcreations.com/simple-diy-storage-cabinet
Check out our site for FREE plans and more http://www.waylightcreations.com

LINKS————————————-
►Facebook – http://facebook.com/waylightcreations
►Twitter – http://twitter.com/waylightcreate
►Google+ – http://plus.google/+waylightcreations1
►Pinterest – http://pinterest.com/waylightcreate
►Website – http://www.waylightcreations.com – FREE PLANS & MORE

Credits———————————–
Music – Waylight Music – http://www.waylightmusic.com/

All sound FX – freesound.org (all public domain)

Project info ——————————-
This project was created with the following materials/tools:
Pine 1 x lumber
Hardboard
Hinges
Hardboard panels
Pocket screws

Episode Notes:

The whole build started out with a few pieces of standard 1x pine boards.

First I marked out and cut the pieces I would need for each shelf.

For this cabinet there are 8. Seven actual shelves and the top.

After I had the proper length cut for each one, I headed over to the table saw and ripped each piece down ¼ inch shorter than each of the sides would be to allow for the back panel later on.

Using a circular saw, I cut some off the side of each board that would be the side to bring it down to the dimension I wanted. I also cut them to length on the miter saw.

Once I had everything cut for the shell of the cabinet, I started the task of drilling all of the pocket holes. I laid these out with equal spacing so they would look somewhat nice when the cabinet was opened, especially since I wasn’t planing on filling in the holes.

After all the holes were drilled I did the most exciting part of the project. I only sanded the side opposite of the pocket holes though. It saved both time and my sanity. I also hit the front edges as well.

The next step was to mark out where each shelf would go. This is fairly quick work of you measure out each shelf and then pencil your lines on with a square.

Now that all the holes are drilled and the marks are drawn you can start screwing the shelves to the sides. I started out by attaching all the shelves to one side. After I had all of those attached, I moved what I had assembled, flipped it and sat it back down on the opposite side. Since both sides are marked the same, this makes it incredibly easy to line up.

Next, I flipped the cabinet on its face and added a ¼ inch deep rabbet around the inside edge of each side to allow it to receive the back panels.

The back panels I used were some ¼ inch thick harboard panels that I had gotten from an old building I recently helped renovate. Before nailing them down, I measured to make sure everything was square and then fastened them down with some brads.

Since these did come from an old building, I sanded down the back of the panels to remove some of the coal dust that was caked into the fibers.

I also made two pieces for the front of the cabinet that would set above and below the doors. To make them look a little nicer, I put chamfer on the edges. Then I glued and nailed them in place.

The last thing to construct was the cabinet doors. The doors I settled on were simple and were assembled with butt joints, glue and you guessed it, more pocket screws.

So they would match the top and bottom plates of the cabinet, I added the same chamfer around the outside edges of the doors, but I left the inside edges how they were.

… read more about this project on our website. Link at the top of the description.
Video Rating: / 5

A Card Catalogue part one: Making the cabinet panels.

http://www.theunpluggedwoodshop.com/
This is a companion video to A Card Catalogue from the new book- The Unplugged Woodshop by Tom Fidgen. 2012. The Taunton Press.
In this video I prepare the carcase panels using 3/4-in. walnut. The parts are jointed, glued and flattened in preparation for dovetails.
For more information on this and other hand crafted projects, check out my book and website- The Unplugged Woodshop.
Thanks for watching!

Designing and Building A One Legged Cabinet – Woodworking

Sponsored By Squarespace – http://www.squarespace.com/foureyes
Save 10% off your first purchase by using the link above or Offer Code FOUREYES

// ABOUT THIS VIDEO

This is a slightly goofier woodworking video. I had the idea to make a one legged cabinet. Not because I thought it would be super useful. I just thought it might be kind of fun. I think it came out really cool. It’s definitely very striking. When you walk into a room, there is no way you’re not going to notice it. Even though it’s a goofy video, there are lots of useful techniques covered. So sit back and enjoy!

___

// TOOLS

▸ Incra T-Rule (the marking square thing) | http://amzn.to/2mgnSDi
▸ Arm R Seal Urethane Top Coat | http://amzn.to/2iv4NqI
▸ Gorilla Gripper (for carrying plywood) | http://amzn.to/2mfgi7C

___

// MY CAMERA GEAR

▸ Camera Body – Nikon D5600 | http://amzn.to/2jWzgn3
▸ Primary Lens – 85mm f/1.8 | http://amzn.to/2kH9ZwC
▸ Secondary Lens – 35mm f/1.8 | http://amzn.to/2lidrup

___

// THE MODERN MAKER PODCAST
▸ www.modernmakerpodcast.com

___

// FOLLOW

▸ Subscribe | https://goo.gl/oVdN4f
▸ Patreon | https://www.patreon.com/ChrisSalomone
▸ Instagram | https://www.instagram.com/foureyesfurniture/
▸ Web | http://www.foureyesfurniture.com/
▸ Twitter | https://twitter.com/_foureyes
▸ Facebook | https://www.facebook.com/foureyesfurniture
▸ Google+ | https://plus.google.com/115764791732926677264

___

// VIDEOS MENTIONED
▸ How To Build Drawer Boxes | https://youtu.be/tc9fwQfUqCA

Music by Chris Jon Johnson. Check him out on bandcamp.com under the name “Sleepy Pablo”.
Link – https://sleepypablo.bandcamp.com/
Video Rating: / 5

Cabinet Pro Software: Woodworking Software for Cabinet Manufacturing

Cabinet Pro Software is the All-In-One Solution for your shop.
Cabinet Pro Standard produces 3D Renderings, shop drawings, bids, cutlists, and panel optimization. Cabinet Pro CNC is Simply Powerful and produces the CNC code directly from the panel optimized parts, without the need for an intermediary CAD/CAM software package! Supports face frame, frameless, blind dado construction, full overlay, inset doors, and many others.

Visit us at www.cabinetpro.com
Video Rating: / 5

Top 40 WoodWorking//Cabinet Awesome Design//wood cabinet refacing – custom cabinets /Tedswoodworking

Tedswoodworking In America – Highest Converting Woodworking Site On The Internet! – https://tinyurl.com/gnpyydw
woodworking trade schools,carpentry school near me ,fine, woodworking tools and shops, cabinetry tools and equipment, woodworking trade schools , carpentry school near me, fine woodworking tools and shops, woodworking tools maine, fine cabinet making, cabinetry tools and equipment, cabinetry school ,carpentry classes, learn woodworking online, rent woodworking tools, teds woodworking review, wood working project plans, tools of woodworking, teds woodworking plans, wood work stool,cabinet maker school, woodworking plans bench, woodworkers cabinet hardware, carpentry classes near me, woodturning classes, fine woodworking store, woodworking hardware supplies, mailbox woodworking plans, woodworking usa, bookcase woodworking plans, furniture building supplies wood, furniture making classes near me, cheap woodworking tools wholesale,local woodworking shops,wood work table,ne woodworking tools and shops,cabinetry tools and equipment, wood work stool, woodworking plans bench woodworkers cabinet hardware,bookcase woodworking plans furniture building supplies wood,cheap woodworking tools wholesale,wood work table,wooden bed,woodworking tools and supplies ,woodworking tool companies,cabinet makers tools supplies,plan cabinet,wood working power tools,woodworking shop tools,where to buy woodworking tools,furniture wood supply wood working table,custom woodworking tools,wood desk plans fine carpentry tools,woodworking tool stores near me,woodworking tool suppliers -fine woodworking magazine wholesale woodworking supplies,used woodworking,woodworking supply catalogs-wood shop equipment//wood for woodworking projects/wood cabinet refacing .cabinet refacing cost/cabinet refacing / buy replacement kitchen cabinet doors-semi custom kitchen cabinets,cabinet refinishing ,kitchen cabinet doors replacement white ,reface cabinet doors ,wood for kitchen ,custom kitchen cabinet doors unfinished .custom built in cabinets, solid wood cabinets online ,kitchen cabinets finishes and styles,custom wood kitchen cabinets,kitchen cabinets door replacement fronts canac cabinets replacement doors,semi custom cabinets, kitchen & bath cabinets,where can i buy replacement kitchen cabinet doors new kitchen cabinet doors only,replacement wooden kitchen doors custom bathroom cabinets,replacement kitchen door fronts,order kitchen cabinets,replacement kitchen doors and drawer fronts replacing kitchen cabinet doors and drawer fronts,custom cabinets kitchen cupboard replacement doors,wood cabinet doors for sale kitchen replacement cupboard doors

DISCOVER THE ONLY WOODWORKING RESOURCE THAT EMPOWERS YOU TO HAVE THE FREEDOM TO BUILD ANYTHING OUT OF WOOD EASILY AND IN A SHORT TIME!
Check Out How = https://t.co/1dDulVgstE .

Learn How Without Expensive Tools Or Formal Training You Can Build Stunning Projects Like Master Craftsman.

This is not one of those videos or magazines you see online…YOU’VE NEVER SEEN ANYTHING LIKE THIS BEFORE!
This is an approach to woodworking that works for anyone at any skill level.
If you have been struggling with woodworking projects for some time now, well Fret no longer….Here is introducing: The World’s Largest Collection of woodworking plans! Click Here To See Video Here == http://bit.ly/2nFLEoH .
Ted’s Woodworking Plans.
Download 16,000 step by step woodworking plans and blueprints with material list [ Link Here=== http://bit.ly/2nFLEoH ]

Get A Lifetime Of Projects Ideas And Inspiration!
There’s Nothing Like These Plans On The Market.
If you are planning to start your woodworking project, this isn’t something you should use, it’s something that you would be insane not to get and use.
Get Instant Access To 16,000 Plans Now.
100% Money Back Guarantee
A 60 Day – No risk, Unconditional Money Back, Satisfaction Guarantee.
Act fast now!!!

Click Here To Check Details == http://bit.ly/2nFLEoH ]

DIY Sideboard Cabinet | How to Build

Detailed blog post with plans available – http://fixthisbuildthat.com/diy-sideboard-cabinet-woodworking-plans/
SUBSCRIBE – https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1

Tools Used:
Kreg Jig – http://amzn.to/2iHNjLf
Shelf pin drilling jig – http://amzn.to/2iOGrMx
Face clamp – http://amzn.to/1E0QZNV
Parallel clamps – http://amzn.to/2iOFp3a

How to get perfect inset drawer fronts VIDEO – https://www.youtube.com/watch?v=fO5aCg-Vnyk

Turning your own drawer pulls – http://fixthisbuildthat.com/custom-wood-pull-turning-kit-rockler/

Making custom cabinet door knobs – http://fixthisbuildthat.com/turn-custom-wooden-cabinet-knobs-lathe/

I’d love your support on Patreon!
https://www.patreon.com/fixthisbuildthat
__
SUBSCRIBE to my channel here:
http://www.youtube.com/channel/UCHYSw…

Fix This Build That
PO Box 680433
Franklin, TN 37068

__
FOLLOW ME on Social Media:
Instagram – http://www.instagram.com/fixthisbuild…
Facebook – http://www.fb.com/ibuildthat
Twitter – http://www.twitter.com/fixthisbuildtht
Pinterest – http://www.pinterest.com/fixthisbuildt
Video Rating: / 5

Cabinet Hardware Jig

Whether you’re updating your cabinets or you’re building a project from scratch, the Kreg Cabinet Hardware Jig (https://goo.gl/xdUuHK) makes it easy to install new knobs and pulls easily and consistently every time. Adjustable hardened steel drill guides, a movable edge guide, and built-in measuring scales ensure simple, repeatable accuracy.

Learn More: https://goo.gl/xdUuHK

See our complete line of Hardware Installation Solutions: http://goo.gl/Me2alY
Video Rating: / 5