SCM Ti7 CNC Spindle Moulder | Scott+Sargeant Woodworking Machinery

The new SCM TI7 L’invincible spindle moulder with Easy Touch control maintains the overall quality and performance that represents the SCM Group. This machine is fully equipped with a color graphic touch screen control unit allowing the operator overall ease when choosing operation and program selections. The control unit operates and controls spindle position-height and tilt, fence position-infeed and outfeed, spindle speeds 900-12,000 RPM, fast sectional table and power feeder arm. These specialized features are complementary to the Ti7’s other features: HSK tool holders, large cast iron infeed and outfeed extension tables and swing away fence.
See our Full range of Spindle Moulders:
http://www.scosarg.com/new-machines/spindle-moulders.html

SCMI F410 woodworking jointer 16 inch straight knife

SCMI F410 woodworking jointer 16 inch straight knife

more pictures at this link

https://picasaweb.google.com/112152080222272190603/SCMIWoodworkingJointer16Inch104InBed3KnifeHead SCMI f 410 16 inch Woodworking Jointer, 17×104 inch bed, 56 inch infeed, 3 knife 4.5 inch head, 7inch tilting skew fence, 220 volt 3phase, serial # ab45000, we will precision level the in feed and out feed within a few thou under our straightedge, clean – check – replace as needed: bearings and electrical, then hone and balance knives if needed, we’ll make sure its ready to cut wood phone (815)756-7273 for a used woodshop equipment video: more photos at this link :http://picasaweb.google.com/pleasantstmachinery
Video Rating: / 5

SCM Profiset Planer & Moulder | Scott+Sargeant Woodworking Machinery

The SCM Profiset 40 & 60 are engineered for the small to mid-size
cabinet and joinery shop. It provides perfect four sided planing and
dimensioning in one pass. The design of the Sintex NT combines the
process of the spindle moulder, planer and thicknesser in one easy
set-up. Less handling and set up equals quick and effortless processing
of your wood components.

The four side planer is the most cost effective and safest way for
furniture and joinery workshops to produce straight planed and profiled
timber, in one pass giving a great time saving. This machine will plane
on 4 sides and mould on 3 sides up to 180mm wide and 105 mm thick. A
very cost effective compact machine in the modern joinery workshop
where speed and safety are important. Supplied as standard with four
cutterheads.

The Profiset is available either as a standard machine or the EP
version has a programmer for automatic ‘Dial a Size’ width and
thickness setting.
Video Rating: / 5

SCM SI400 Nova Panel Saw | Scott+Sargeant Woodworking Machinery | scosarg.com

SCM SI400 NOVA Panelsaw uses next generation manufacturing techniques. Continuous research and development coupled with advanced design solutions are all factors that ensure that the Nova range offers outstanding accuracy, quality and value. All machines are produced to certified quality standards. An efficient worldwide after-sales service and readily available spare parts, for existing or new machines, gives you peace of mind for years to come.
Features:
– Blade controls mounted on front of machine
– Digital readout for blade tilt position
– Telescoping crosscut fence with 3200mm capacity and two flip stops
– External scoring adjustments with repeat/memory stops
– Separate 1hp motor for scoring

Get More information From:

http://www.scosarg.com/scm-si400-nova-sliding-table-panel-saw.html

Scott & Sargeant Woodworking Machinery Ltd
Blatchford Road
Horsham RH13 5QR
ENGLAND

Tel +44 (0) 1403 273000
Website http://www.scosarg.com

SCM Olimpic K Edgebander – Woodworking Machinery +353 87 2543600 Diamond Tools & Woodworking

Welcome to Diamond Tools and Woodworking Machinery Ltd
http://www.diamondtoolsireland.com/
+353 87 2543600

Check out our full range of SCM Olimpic K Edgebanders at:
http://www.diamondtoolsireland.com/woodworking-machinery/edgebanders/

SCM Olimpic K Edgebander – High performance automatic edge bander

Flexible and electronic edge bander.
High customisation with many available solutions for different productive requirements.
Productive thanks to the 12 or 18 m/min feed speed also when rounding.
Ample controlled groups management for a very quick change among the various edge types, solid wood
up to 12 mm.

Advantages:
“round 2M”: incomparable productivity and quality with 2 motor technology. The features of the group (Scm patent) allows an 18 m/min rounding speed as well as the possibility of the simultaneous edge trimming operation. Two operations, in a single group, occupying less space, allows for a reduction in time for edge banding of panels.

RT-E panel edge trimming group: a perfect joint line of the edge. An optimum panel edge trimming group before the edge gluing, thanks to the use of the front copying devices (optional feature), that allow a constant removal over the entire panel length, maintaining the same work piece geometry.

“Startouch” control: just a “touch” for using the machine. Error-free programming with the large dimensioned touch- screen display and its customised graphics that allows an intuitive and easy selection of the main machine functions.

“Netline”: programming machines automatically. The automatic programming of beam saws, edge banders and machining centres, interconnected via a PC, with advanced software, allows the creation of complete projects without any operator intervention and no risk of errors.

Tech Spec:
Edge thickness mm 0,4 – 8 (12 opt.)
Panel thickness mm 8 – 60
Feed speed m/min 12-18
Compressed air bar 6

SCM Olimpic K Edgebander

Please subscribe to our channel to see more woodworking machinery videos.
Video Rating: / 5

SCMI Tech 90 Super Pod and Rail CNC woodworking cabinet software

This tech90 has low use, it purchased by a union carpenter training school in 1995 for demonstartion purposes. We have had for the past few years (its not the perfect machine for our owner’s wood product operation). Its excellent for parts with the router and groover saw, plus will handle full sheet goods too. More pictures at this link…
http://picasaweb.google.com/pleasantstmachinery/SCMITech90SuperPodAndRailCNCWoodworkingMachiningCenter#
Video Rating: / 5

16 inch woodworking jointer Italian SCMI F410

more pictures at this link

https://picasaweb.google.com/112152080222272190603/SCMIWoodworkingJointer16Inch104InBed3KnifeHead SCMI f 410 16 inch Woodworking Jointer, 17×104 inch bed, 56 inch infeed, 3 knife 4.5 inch head, 7inch tilting skew fence, 220 volt 3phase, serial # ab45000, we will precision level the in feed and out feed within a few thou under our straightedge, clean – check – replace as needed: bearings and electrical, then hone and balance knives if needed, we’ll make sure its ready to cut wood phone (815)756-7273 for a used woodshop equipment video: more photos at this link :http://picasaweb.google.com/pleasantstmachinery